Version 1.1 rev Jan 2013
Page 70
, Features and Functionality
3.5.2 - Triggering options in Non-Frame Transfer (NFT) mode
3.5.2.1 - Internal (NFT)
When the camera is idle, i.e. not actively capturing images, it is repeatedly running the Idle Keep Clean Cycle. When the
Start command is received from the PC, the camera will complete the current Keep Clean Cycle, and then perform
sufcient vertical shifts to ensure the Image and Storage regions are completely free of charge. The camera is now
ready to start the real exposure sequence.
The timing sequence is illustrated in the gure below. During the exposure the Fire output will be high and there will be no
vertical clocking. However, the horizontal register will keep running. At the completion of the exposure time the FIRE pulse
will go low and the Image area of the EMCCD will be shifted into the Storage area. As the acquired signal is now safely
placed in the masked off region of the EMCCD, light still falling on the EMCCD will not contaminate the acquired image
while it is being read out. On completion of the readout the camera will perform the Internal Keep Clean Cycle until the
user specied cycle time has elapsed. This process is continued until the complete series of acquisitions has taken place.
Figure 28: Internal Trigger in Non-Frame Transfer mode
Comments to this Manuals