Ultra Start 450 SERIES Specifications Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 39
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
5
WARNING: In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse
of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get
to know your appliance and enable you to use the equipment correctly. Please read these instructions in their entirety and make sure
that anyone else who may use the appliance also reads them beforehand.
IMPORTANT WARNING
UNPACKING
WARNING - some of the tools are very sharp e.g.
blades, etc..
INSTALLATION
We recommend that you install your appliance on
its wall frame.
CONNECTION
Always check that your mains supply corresponds
to that indicated on the identification plate on the
motor unit and that it can withstand the amperage.
Never plug your appliance into the mains supply
before placing it inside the preparation bowl.
HANDLING
Always take care when handling the blades, as
they are extremely sharp.
ASSEMBLY PROCEDURES
Follow the various assembly procedures carefully
(see page 8) and make sure that all the attachments
are correctly positioned.
USE
Never try to override the safety systems.
Never insert an object into the preparation.
Never switch the appliance on unless it has been
placed in the preparation bowl.
Before dismantling the foot, bell or whisk always
check that the power mixer is unplugged.
We recommend that you tilt the appliance at
a slight angle to prevent the bell from touching the
bottom of the container.
CLEANING
As a precaution, always unplug your appliance
before cleaning it.
Always clean the appliance and its attachments at
the end of each cycle.
Never immerse the motor unit in water.
For parts made from aluminum, use cleaning fluids
intended for aluminum.
For plastic parts , do not use detergents that are
too alkaline (e.g., containing too much caustic soda or
ammonia).
Robot-Coupe can in no way be held responsible
for the user’s failure to follow the basic rules of
cleaning and hygiene.
MAINTENANCE
Before opening the motor housing, it is absolutely
vital to unplug the appliance.
Check the seals and washers regularly and ensure
that the safety devices are in good working order.
It is particularly important to maintain and check the
attachments since certain ingredients contain corrosive
agents, e.g. citric acid.
Never operate the appliance if the power cord
or plug has been damaged or if the appliance fails to
work properly or has been damaged in any way.
Do not hesitate to contact your local Maintenance
Service if something appears to be wrong.
KEEP THESE INSTRUCTIONS
IN A SAFE PLACE
WARNING
WARNING
Procedure to follow if the stick blender is acci-
dentally immersed during use.
1) Do not touch either the power mixer, the
bowl or the work surface.
2) Unplug the mixer’s power cord from the
wall socket.
3) Remove the power mixer from the prepara-
tion.
4) Tilt the power mixer to drain off as much li-
quid as possible.
5) Do not switch the power mixer back on, as
there is still a risk of electrocution.
6) Send the power mixer to a Robot-Coupe
approved after -sales service to have the
electrical components cleaned and dried.
Page view 3
1 2 3 4 5 6 7 8 9 ... 38 39

Comments to this Manuals

No comments